The Seat full link activation service allows us to offer activation of Seat Full link Activate Codes at a lower price than most dealerships. We offer this service either in person or we can work remotely if you have an SD card & SD reader, and OBD Eleven or VCDS to change some coding. The service takes roughly 40 minutes and includes a free software update if you aren't already up to date. If your has a single USB port you will have to replace this to use Apple Carplay. You can find the necessary USB on our website. If your car has a double USB, it will be compatible with Carplay. This is because cars with & without Full Link, that have a single USB port have different ports fitted from the factory. We can only activate units equipped with Navigation at this price. If you're in doubt, contact us. Units without navigation require different activation methods. Cars on software versions beginning with 02xx will require some coding to display the full link menu, you can do this with OBDEleven or similar. We cannot do this remotely.
This service is not suitable for Seat units that are HW41 (H41) fitted to vehicles with virtual cockpits or Seat HW50 (H50). You can check this by going to settings, system information are :-
1. For a remote activation you will need a windows PC with Team viewer or Anydesk installed. You will also need a 4GB+ SD card.
2. By purchasing this service you understand nothing will be delivered to you. We will contact you to arrange a booking slot for you.
3. AutoTM and Apple CarPlayTM technologies to customers for maximum connectivity between their smartphones and vehicles.
4. This service can be done remotely providing you have access to a windows laptop/pc with a sd card reader and a spare SD Card (4GB-32GB)
5. A Single-Seat license can be a software development, debug, or deployment license and is typically a named-user non-concurrent license.
6. There are two methods for activating single-seat licenses when the computer has Internet access.
7. Identity-based Activation: using your NI User Account if you have not your NI Account so first you create your NI Account.
Identity-Base Activation
1. This is the recommended activation method.
2. Identity-based activation requires that you register your serial number to your NI User Account, which enables you to have access to all of the software and entitlements associated with your license agreement.
3. You can register your serial number in one of two methods.
4. You can register it with your "Claim Access" e-mail, which is sent to the license contacts when the NI software is purchased.
5. If you do not have access to this e-mail, you can sign into your NI user account and register your serial numbers following these steps.
6. Then, make sure the computer is connected to the Internet and you have logged in to your NI User Account in the NI License Manager (NILM).
7. The steps below apply for NILM 4.7 or later. For older versions refer to Knowledge Base article Activating NI Software Using Legacy NI License Manager.
8. Open NI License Manager and make sure that the software you want to activate is listed in the Product Summary tab.
9. If it is not, download the appropriate software.
10. Click Activate Software.
11. Select Check my account for licenses from the drop-down menu and click the Activate button.
Serial Number Activation
Note:-The Seat Full Link Activation for activating the NI software products with Single-Seat License. If you are a Software Admin, part of a volume-license, or using NI Community edition products, we have other activation processes to guide you in your specific licensing situation.
1. After clicking Activate Software in NILM, select Enter a serial number from the drop-down menu.
2. Enter your serial number next to each software product that you want to activate.
3. Depending on your company's licensing contract(s), software licenses may exist on separate serial numbers.
4. Click the Activate button.
5. If the activation was successful, you should receive a message similar to the window below.
6. Activate NI Software Without Internet Connection
7. Typical NI software activation relies on an internet connection. However, if you have a computer that does not have access to the internet, you are still able to activate
your software by using activation codes or a disconnected license.
8. If you are part of a Volume License Agreement, you can activate software on your offline computer by contacting your admin to create a disconnected license file, and then follow steps to install the disconnected license.
9. If you have a Single-Seat License, follow the steps below to activate software on your offline computer.
Create an Activation Code
1. An Activation Code is 20-digit alphanumeric code that is specific to your computer, your software, and your serial number.
2. For the offline computer, find the unique computer ID, the serial number of your product, and the version of the software installed on the computer.
3. Note that activation codes are unique to the version of the software that it was generated for. For example, an activation code for LabVIEW 2021
will not activate LabVIEW 2022Q3 and an activation code for LabVIEW 2020 SP1 will not activate LabVIEW 2020.
4. On a computer with an internet connection, visit the NI Product Activation page. Fill out the fields on this page with the information about the offline computer.
It will generate an activation code valid for the offline computer only.
5. You will need a separate activation code for each software product you would like to activate.
6. If you cannot generate the activation code, contact NI Support and request an activation code.
7. Now that you have your Activation Codes, you can activate the software on your offline computer either through NI License Manager or the NI Licensing Wizard within your product.
8. While either method will end in product activation, using NI License Manager will be easier if you have multiple pieces of software (i.e. multiple activation codes) to input at once.
Whereas, NI Licensing Wizard will be more straightforward if you only have one piece of software you would like to activate.
9. Using NI License Manager
10. Once you have obtained the activation code(s) for your product(s), launch NI License Manager.
11. Click on Activate Software.
12. If you have not logged into your NI Account before, NI License Manager will prompt you to log in. Dismiss this notification by clicking on No internet connection? Continue with offline activation.
13 .Enter your Activation Code(s). Click on Activate.
14. If your software activation was successful, you should see a window similar to the following image. Click on Finish.
15. Using the NI Licensing Wizard
16. Open the software you would like to activate (e.g. LabVIEW 2022 Q3). If it is not licensed yet, it will launch the NI Licensing Wizard.
17. If you have not logged in before, you will be prompted to log in for activation. You can dismiss that by clicking on No internet connection? Continue with offline activation.
18. If you have Older software versions' Licensing Wizard will have a different interface (image below). Click on the 'X' to dismiss the login prompt.
19. Enter your Activation Code(s) and click on Activate.
20. If your have Older software versions' Licensing Wizard will have a different interface (image below). Enter your Activation Code and click on Apply Codes.
21. If your software activation was successful, you should see a window similar to the following image.
22. Click on Finish.
No comments:
Post a Comment